Developing FPGA Projects
Developing FPGA projects for FPGAOL is very same as usual. You only need to take care of selecting chip and pin specification.
If you are not familiar with developing FPGA project on Vivado, please refer to Vivado tutorial.
We strongly recommand you to use our example projects and constraint file.
select FPGA chip
Please select xc7a100tcsg324-1. Other chips won't work on FPGAOL.
Human Interface Pin specification
Correspondence between LEDs & SWs and FPGA pins：
| LED0 | LED1 | LED2 | LED3 | LED4 | LED5 | LED6 | LED7 |
|---|---|---|---|---|---|---|---|
| JC1 | JC2 | JC3 | JC4 | JC7 | JC8 | JC9 | JC10 |
| SW0 | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 |
|---|---|---|---|---|---|---|---|
| JD1 | JD2 | JD3 | JD4 | JD7 | JD8 | JD9 | JD10 |
Other Resource on Board
- 100MHz clock: E3
You can also use an existing constraint file.